Brass Pop-up head sprinklers are quite common in systems from 20 or more years ago. These systems are still very serviceable, and the pop-up head is an excellent way to keep them in good shape. The version with pop-up action gives an extra inch or so of spray height which makes it more suitable for grass, while a traditional flush head is more common in above-ground applications such as shrubs and flowerbeds. The brass nozzle includes an adjustment screw which allow you to reduce the spray pattern down to 75% of its maximum radius of 15 ft. Pop-up heads have 1/2-in. female pipe threads (FPT) and you will typically mount them on a 1/2-in. male pipe thread (MPT) rigid PVC or cut-off riser. The Pop-up head wrench is an accessory that makes it simple to remove and install heads without extensive digging. The Pop-up head nozzle is easy to replace with a brass head spray nozzle with male threads.
The recommended operating pressure is 30 PSI. For outdoor irrigation use with cold water only.
For replacing existing low-profile sprinkler heads in landscape areas
Precision-machined brass ensures consistent spray quality
Available in full, half, and quarter patterns to suit a variety of landscape designs
1-1/2-in. pop-up height for lawns
Compatible with flush heads from Orbit, Champion and other major brands
Non-pressure-regulating spray head – check local code for restrictions
Control with a B-hyve smart controller for optimum water conservation